Cisco Cisco ONS 15600 Multiservice Switching Platform (MSSP) Guía De Instalación

APSCDFLTK (MN)

BLSR-RESYNC (NA)

BLSR-SW-VER-MISM

Return to your originating procedure (NTP).

The download task does not affect traffic because the active software continues to run at the primary 
RAM location; therefore, you can download the software at any time.

If CTC is not already running, start CTC.

In CTC node view, click the Alarms tab.

Verify that the alarm filter is not on. Click the Filter tool at the lower-left of the window.

The Alarm Filter dialog box appears. Click to select any check box that is not selected in the Show 
Severity section of the General tab.

On the Alarms tab, check all nodes for existing alarms. Resolve any outstanding critical alarms before 
proceeding. If necessary, refer to the Cisco ONS 15600 Troubleshooting Guide.

Verify that the TSC card in Slot 10 is the active card. If it is not, complete the following:

Right-click the TSC in Slot 5 and choose Soft-reset Card.

Click Yes in the confirmation dialog box.

Click OK in the Connection Lost dialog box.

The TSC card takes several minutes to reboot. 

If the display is not in node view, double-click the node icon to return to node view.

Click the Maintenance tab and then click the Software button.

Click Download. The Download Selection dialog box appears.

Click the Browse button.

In the Open dialog box, navigate to the software package files on the ONS 15600 software CD or on your 
hard drive, if you are working from a local copy. 

This task downloads the software to the ONS 15600 nodes.

PC or UNIX workstation

Required

Onsite or remote (but in the presence of the workstation)

Superuser