Cisco Cisco Wireless Control System Version 4.0 Guía De Información
Wireless Control System (WCS) Troubleshoot FAQ
Document ID: 72782
Contents
Introduction
WCS Troubleshoot FAQ
Related Information
WCS Troubleshoot FAQ
Related Information
Introduction
This document answers frequently asked questions about how to troubleshoot the Cisco Wireless Control
System (WCS).
System (WCS).
Refer to Cisco Technical Tips Conventions for information on document conventions.
WCS Troubleshoot FAQ
Q. What are the minimum requirements to run Cisco WCS?
A. These are the minimum requirements that are necessary to install the Cisco WCS:
WCS Version 2.0: The Cisco WCS software can run on a workstation/server class
WCS server: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM, that runs
Windows
WCS server: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM, that runs
Windows
®
2000/SP4 or Windows 2003 with all critical and security Windows
updates installed. The web browser needs to be Microsoft Internet Explorer (IE)
6.0/SP 1 or later.
6.0/SP 1 or later.
♦
WCS Version 2.1: The Cisco WCS software can run on a workstation/server class
WCS server: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM, that runs
Windows 2000/SP4 with all critical and security Windows updates installed. The web
browser needs to be IE 6.0/SP 1 or later.
WCS server: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM, that runs
Windows 2000/SP4 with all critical and security Windows updates installed. The web
browser needs to be IE 6.0/SP 1 or later.
♦
WCS Version 2.2: The Cisco WCS software can run on a workstation/server class
system: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM. These operating
systems are supported: Windows 2000/SP4 or Windows 2003 with all critical and
security Windows updates installed. The Linux Red Hat
system: Pentium 4, 2.4 GHz or faster, with 1 GB or more RAM. These operating
systems are supported: Windows 2000/SP4 or Windows 2003 with all critical and
security Windows updates installed. The Linux Red Hat
®
Enterprise Linux ES
Version 3 is supported. The Cisco WCS web interface requires IE 6.0/SP1 or later.
♦
WCS Version 3.0: The Cisco WCS can run on a workstation/server class system:
For up to 500 Cisco 1000 Series lightweight access points: 2.4 GHz Pentium
with 1 GB RAM.
with 1 GB RAM.
◊
For over 500 Cisco 1000 Series lightweight access points: Dual Processors
(at least 2.4 GHz each) with minimum 2 GB RAM.
(at least 2.4 GHz each) with minimum 2 GB RAM.
◊
20 GB Hard Drive
◊
These operating systems are supported:
Red Hat Enterprise Linux ES release 3.0
◊
Windows 2000/SP4 or later, or Windows 2003/SP1 or later with all critical
and security Windows updates installed
and security Windows updates installed
◊
♦
WCS Version 4.0: For information on the minimum requirements to install WCS on
version 4.0, refer to the System Requirements section of the Cisco Wireless Control
version 4.0, refer to the System Requirements section of the Cisco Wireless Control
♦