Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Cisco
  4. Cisco ONS 15310-MA SONET Multiservice Platform
  5. Notas de publicación

Cisco Cisco ONS 15310-MA SONET Multiservice Platform Notas de publicación

Descargar
Página de 12
 
3
Release Notes for Cisco ONS 15310-MA Release 8.6
OL-19083-01
  Caveats
A CONTBUS-IO-B alarm reported on CE-100T with a filler card in slot 4.
This issue occur under the following conditions:
1.
A CE-100T card is plugged in into slot 1, 2, 5, or 6 with a filler card already present in slot 3 or 4. 
2.
The CONTBUS-CLK-A or the CONTBUS-CLK-B alarm is raised after the CE-100T card or the 
CTXMA is reset.
No workaround is available for this issue. This issue will be resolved in a future release.
CTC
This section documents caveats for CTC in Release 8.6.
CSCsk83405—Retrieval of OSPF diagnostics raises the OSPF Hello Fail alarm
Performing a retrieval of OSPF diagnostic information from the CTC network raises the OSPF Hello Fail 
alarm and the controller card is locked. This issue will be resolved in a future release.
CSCsq14054—CTC hangs when VCAT state changes from OOS,DSBLD to IS,AINS
CTC hangs when the VCAT state transitions from OOS,DSBLD to IS,AINS. The workaround is to 
manually set the state for individual members. This issue will be resolved in a future release.
Data I/O Cards
This section documents caveats for Data I/O Cards in Release 8.6.
CSCso84751—LCAS members remain in LCAS Rx DNU alarm state after XC soft reset
After XC soft resets on CE-MR-10 or CE-MR-6 cards, LCAS members may remain in an LCAS Rx 
DNU alarm state. This issue will be resolved in a future release.
CSCsu30587—VT members remain idle after trunk card is pulled multiple times
VT members remain idle on pulling truck cards multiple times. The workaround is to move the affected 
members to OOG state and then to IS state. This issue will be resolved in a future release.