Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica
15
ED-STM4:PENNGROVE:STM-4-1-2:114:::DCC=Y,AREA=10.92.63.1,SYNCMSG=N,
SENDDUS=N,SFBER=1E-4,SDBER=1E-6,SOAK=10,OSPF=Y,MSDCC=N,NAME="STMPORT",
CMDMDE=NORM,EXPTRC="AAA",TRC="AAA",TRCMODE=MAN,
TRCFORMAT=16-BYTE,ADMSSM=G811,SENDDUSFF=N,AISONLPBK=ALL:UNLOCKED,
AUTOMATICINSERVICE;
SENDDUS=N,SFBER=1E-4,SDBER=1E-6,SOAK=10,OSPF=Y,MSDCC=N,NAME="STMPORT",
CMDMDE=NORM,EXPTRC="AAA",TRC="AAA",TRCMODE=MAN,
TRCFORMAT=16-BYTE,ADMSSM=G811,SENDDUSFF=N,AISONLPBK=ALL:UNLOCKED,
AUTOMATICINSERVICE;
ENT-EQPT
Use the Enter Equipment (ENT-EQPT) command to automatically enter all facilities supported by the
card and assign default values to all the facility and path attributes. The ENT-EQPT command is used
to preprovision an NE configured in mutlishelf mode.
card and assign default values to all the facility and path attributes. The ENT-EQPT command is used
to preprovision an NE configured in mutlishelf mode.
Input Format:
ENT-EQPT:[<TID>]:<AID>:<CTAG>::<AIDTYPE>:[PROTID=<PROTID>],[PRTYPE=<PRTYPE>],
[RVRTV=<RVRTV>],[RVTM=<RVTM>],[CARDMODE=<CARDMODE>],[PEERID=<PROTID>],
[REGENNAME=<REGENNAME>],[CMDMDE=<CMDMDE>],[TRANSMODE=<TRANSMODE>]
,[RETIME=<RETIME>],[SHELFROLE=<SHELFROLE>],[FRPROLE=<FRPROLE>],[FRPSTATE=<F
RPSTATE>][:];
,[RETIME=<RETIME>],[SHELFROLE=<SHELFROLE>],[FRPROLE=<FRPROLE>],[FRPSTATE=<F
RPSTATE>][:];
•
TID is the name of the node you want to access. If you only want to query the node you connected
to, leave the TID blank.
to, leave the TID blank.
•
AID indicates slot and port.
•
CTAG is any non-blank character series that does not have to be unique.
•
AIDTYPE is an access identifier.
•
PROTID is the protection group name. PROTID is a string.
•
PRTTYPE is the protection type.
•
RVRTV is the retrieve mode.
•
RVTM is the retrieve time.
•
CMDMDE is the card mode.
•
PEERID indicates the peer trunk facility of the regeneration group on the OTU2-XP card.
Accessed using the CHAN AID.
Accessed using the CHAN AID.
•
REGENNAME indicates the name of a regeneration group. Applicable only to DWDM flavored
cards, which support regeneration group. REGENNAME is a string. The default value is "NULL".
cards, which support regeneration group. REGENNAME is a string. The default value is "NULL".
•
RETIME indicates the RETIME function for all the facilities on this card. Applies only to the
DS1/E1-56 card. The parameter type is ON_OFF (disable or enable an attribute). (Supported on
the E1-21-DS3-E3-3 and E1-63-DS3-E3-3 card for Cisco ONS 15310-MA SDH platform).
DS1/E1-56 card. The parameter type is ON_OFF (disable or enable an attribute). (Supported on
the E1-21-DS3-E3-3 and E1-63-DS3-E3-3 card for Cisco ONS 15310-MA SDH platform).
•
FRPROLE indicates the fast ring protection enable mode for GE-XP and 10GE-XP cards units
involved in a protection scheme.
involved in a protection scheme.