Cisco Cisco Wireless Control System Version 4.0 Manual Técnica
Wireless Control System (WCS) Certificate Signing
Request (CSR) Installed on a Linux Server
Configuration Example
Request (CSR) Installed on a Linux Server
Configuration Example
Document ID: 107600
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
CSR Generation Using a WCS
Prerequisites
Requirements
Components Used
Conventions
Background Information
CSR Generation Using a WCS
Using the Certificate for secure login (HTTPS)
Verify
Troubleshoot
Related Information
Verify
Troubleshoot
Related Information
Introduction
This document describes how to generate a Certificate Signing Request (CSR) for Wireless Control System
(WCS) that runs on a Linux server.
(WCS) that runs on a Linux server.
Prerequisites
Requirements
Before you attempt this configuration, Cisco requires that you have knowledge on these topics:
Linux command−line interface (CLI)
•
Wireless Control System
•
Components Used
The information in this document is based on WCS version 4.1.91.0.
Note: CSR generation that uses a WCS is supported with WCS versions 4.1.91.0 and above.
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
Background Information
A CSR is submitted to a third−party CA in order to obtain a certificate, which they digitally sign. This
certificate is used by WCS for login authentication. Before the CSR is created, the applicant first generates a
certificate is used by WCS for login authentication. Before the CSR is created, the applicant first generates a