Cisco Cisco ONS 15305 Multiservice Customer Access Platform Notas de publicación

We recommend that you use the latest version of Management Software when you upgrade a network 
element (NE) from an older release. This is because an upgrade may imply either a change in the object 
identifier (OID) or a change in feature attributes for features supported by the device, or both. Any 
management software that Ericsson supplies would require support for the new OID and changed feature 
attributes. Check the release note for the management software about supported NE versions.

If you are using AXX 9820 CRAFT, you may require to reconnect to the device to re-synchronize the 
changes after download.

History of changes in object ids for the ONS 15305:

R1.01.3.6.1.4.1.7546.1.4.1.1.1

R1.11.3.6.1.4.1.7546.1.4.1.1.2

R2.01.3.6.1.4.1.7546.1.4.1.1.3

Cisco Edge Craft (CEC) R.2.2 is the minimum required for operating this network release of 
ONS 15305. Cisco ONS 15305 2.x  includes CEC and network release.

Do not insert the new Ethernet modules such as 2xGE + SMAP, 8xFE + SMAP, and 8xFE-SFP, before 
the NE is upgraded to network release 2.x. The software package must be loaded on the Compact Flash 
card. Both the main card and system controller must be upgraded before the modules are inserted, else 
it will cause the device to continuously restart. 

When upgrading from a device running release 1.x, download the system controller software 
(45004-77BA_PM_ED16.bin) separately before you upgrade to R.2.1. When restarted, the network 
release download (55004-01BA_PM_ED16.def) can be issued, which will be stored in the Compact 
Flash card on the system controller.

Configuration backups (CDB) taken on devices running ONS 15305 R1.1.0 and older versions cannot 
be restored on devices running ONS 15305 R1.1.1 and later releases. After ONS 15305 R1.1.1 (and later 
releases) is online, a new configuration backup must be made that is forward compatible. After AXX 
9200 EDGE R.1.1 ICS05 (and later) is online, a new configuration backup must be made that is forward 
compatible.

When upgrading the ONS 15305 from R.1.x, it may be experienced that modules containing Ethernet 
switches do not initialize (HotSwap Failure alarm). A resolution for this issue (too short GALNET reset) 
is provided from R1.1.1. However, it is activated only on the next system restart. The workaround is an 
individual module restart. Upgrade through a local management connection, even when the device is 
available through other management connections.