Cisco Cisco ONS 15310-MA SONET Multiservice Platform Referencia técnica

The defaults currently displayed are exported whether or not they have been applied to the current node.

The NE defaults can also be exported from the File > Export menu. These exported defaults are for 
reference only and cannot be imported.

Log into CTC at the node where you want to edit NE defaults. Refer to the Cisco ONS 15310-CL and 
Cisco ONS 15310-MA Procedure Guide for login procedures. 

Click the Provisioning > Defaults tabs. 

Click Export.

If the desired file to export to does not appear in the Export Defaults to File dialog box (or does not yet 
exist) click Browse and browse to the directory where you want to export the data; then either choose or 
type in (to create) the file to export to [the defaults will be exported as a text file delimited by equals (=) 
signs].

Click OK.

The tables in this section list the default settings for Cisco ONS 15310-MA common control, electrical, 
and data cards. Cisco provides several types of user-configurable defaults for these cards. Types of card 
defaults can be broadly grouped by function, as outlined in the following subsections. For information 
about individual card settings, refer to the “Change Port Settings” chapter in the Cisco ONS 15310-CL 
and Cisco ONS 15310-MA Procedure Guide.

When the card level defaults are changed, the new provisioning done after the defaults have changed is 
affected. Existing provisioning remains unaffected.

Most card-level and port-level configuration defaults correspond to settings found in the CTC card-level 
Provisioning tabs. 

The full set of ALS configuration defaults can be found in the CTC card-level Maintenance > Optical > 
ALS tabs for supported cards. ALS defaults are supported for PPM (SFP) OC-N ports on the CTX2500 
card.

ML-100T-8 console port access and RADIUS server access defaults can be found in the CTC card-level 
IOS tab for ML-100T-8 cards.