Cisco EFG250 EtherFast Network Attached Storage V 2.0 Guía De Administador
Managing the NSS
Restoring a Configuration File
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
137
7
Restoring a Configuration File
You can easily overwrite the current configuration settings with the configuration
settings in a saved configuration file.
settings in a saved configuration file.
NOTE
If you restore a configuration file that was saved in an older version of the NSS
firmware than the current version, check the settings after you restore the file to
ensure they were updated correctly.
firmware than the current version, check the settings after you restore the file to
ensure they were updated correctly.
To restore a configuration file:
STEP 1
From the Manager Menu, click Admin
Configuration.
The Configuration Manager page appears.
STEP 2
If the configuration file is not located on a volume in the NSS, copy it onto a USB
flash device and then insert the USB flash device into the AUX-1 port.
flash device and then insert the USB flash device into the AUX-1 port.
STEP 3
From the Stored Configuration Location field, select the location of the saved
configuration file.
configuration file.
STEP 4
Click Update.
STEP 5
Click Restore.