Cisco Cisco Content Switching Module Notas de publicación

Router(config)# module csm 4

Router(config-module-csm)# vlan 10 client

Router(config-slb-vlan-client)# route 10.0.0.0 255.255.255.0 gateway 1.1.1.1

For load balancing to function properly, all traffic arriving from the 10.0.0.0/24 subnet must 
reach the CSM through VLAN 10.

For a description of caveats open in CSM software release 3.1(1a), see the 

.

Because CSM software release 3.1(1a) is the first release in a new release train. There are no resolved 
caveats in this release.

CSM error messages may be received and reported in the system log (syslog). This section describes 
these messages.

When syslog messages are received, they are preceded by one of the following banners:

Where # is the slot number of the CSM module.

Error Message CSM_SLB-4-INVALIDID Module # invalid ID 
00:00:00: CSM_SLB-4-DUPLICATEID Module # duplicate ID

00:00:00: CSM_SLB-3-OUTOFMEM Module # memory error

00:00:00: CSM_SLB-4-REGEXMEM Module # regular expression memory error

00:00:00: CSM_SLB-4-ERRPARSING Module # configuration warning

00:00:00: CSM_SLB-4-PROBECONFIG Module # probe configuration error

00:00:00: CSM_SLB-4-ARPCONFIG Module # ARP configuration error

00:00:00: CSM_SLB-6-RSERVERSTATE Module # server state changed

00:00:00: CSM_SLB-6-GATEWAYSTATE Module # gateway state changed

00:00:00: CSM_SLB-3-UNEXPECTED Module # unexpected error

00:00:00: CSM_SLB-3-REDUNDANCY Module # FT error

00:00:00: CSM_SLB-4-REDUNDANCY_WARN Module # FT warning

00:00:00: CSM_SLB-6-REDUNDANCY_INFO Module %d FT info

00:00:00: CSM_SLB-3-ERROR Module # error

00:00:00: CSM_SLB-4-WARNING Module # warning

00:00:00: CSM_SLB-6-INFO Module # info

00:00:00: CSM_SLB-4-TOPOLOGY Module # warning

00:00:00: CSM_SLB-3-RELOAD Module # configuration reload failed

00:00:00: CSM_SLB-3-VERMISMATCH Module # image version mismatch