Cisco Cisco CAMLWA Camera Lens Wide Angle 2.3mm Fixed Manual Iris Guía Del Usuario

Accessory Installation Processes

Installing the VC220 Cameras in a VC 025 Enclosure

Camera Accessories Installation and Administration Guide

STEP 1

If a dome cover is attached to the camera, remove the two screws with the
provided TORX

™

screwdriver, and then detach the dome cover.

STEP 2

Use the provided TORX

™

screwdriver to loosen the four screws that attach the

enclosure cover to the base and lift the enclosure cover off the base.

STEP 3

Place the camera into the base, aligning the bottom of the camera with the raised
base of the enclosure.

TIP

Temporarily place the enclosure cover back on to make sure the Status LED comes
through the opening in the enclosure.

195037