Cisco Cisco CAMLMI Camera Lens 3-8mm Varifocal Manual Iris Guía Del Usuario
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Accessory Installation Processes
Installing a Lens
Camera Accessories Installation and Administration Guide
18
2
STEP 3
Screw the new lens onto the opening of the camera. The camera accepts both C-
and CS-mount lenses.
and CS-mount lenses.
•
If you are using a CS-mount lens, screw the lens into the lens opening.
•
If you are using the C-mount lens then you need to use the C-mount 5 mm
lens adapter ring. The adapter ring is included with the camera.
lens adapter ring. The adapter ring is included with the camera.
•
If you are using a DC auto iris lens, connect its cable to the DC auto iris lens
connector on the IP camera. The illustrations below show the location of the
connector on the IP camera.
connector on the IP camera. The illustrations below show the location of the
connector on the IP camera.
STEP 4
If you have a manual iris lens, adjust the iris according to the prevailing light
conditions.
conditions.
STEP 5
Adjust the focus of your lens. Turn the lens slowly either clockwise or
counterclockwise until the desired image appears. Do not turn the lens too far in
either direction.
counterclockwise until the desired image appears. Do not turn the lens too far in
either direction.