Cisco Cisco ONS 15310-MA SONET Multiservice Platform Guía De Instalación
16
Upgrading the Cisco ONS 15310-MA to Release 8.5.x
78-18171-01
DLP- U350 Manually Restore the Database
Step 7
Return to your originating procedure (NTP).
NTP-U235 Upgrade to ONS 15310-MA Release 8.5.x Using TL1
Note
The Link Integrity Timer duration cannot be configured when you downgrade Cisco ONS 15310-MA
Release 8.5.x to Cisco ONS 15310-MA Release 8.5. When downgraded to Cisco ONS 15310-MA
Release 8.5, the default timer value of 200 ms is assumed for Link Integrity timer.
Release 8.5.x to Cisco ONS 15310-MA Release 8.5. When downgraded to Cisco ONS 15310-MA
Release 8.5, the default timer value of 200 ms is assumed for Link Integrity timer.
Note
This procedure assumes you are upgrading using Release 6.x TL1 syntax. TL1 commands issued prior
to software activation to Software R8.5.x varies in syntax depending on the release you are actually
upgrading from. To ensure that your syntax for each command is correct, use the TL1 syntax supplied
in the Cisco ONS SONET TL1 Command Guide for your particular release when issuing the following
commands:
to software activation to Software R8.5.x varies in syntax depending on the release you are actually
upgrading from. To ensure that your syntax for each command is correct, use the TL1 syntax supplied
in the Cisco ONS SONET TL1 Command Guide for your particular release when issuing the following
commands:
•
ACT-USER
•
COPY-RFILE
•
REPT EVT FXFR
•
OPR-PROTNSW-<OCN_TYPE>
•
RTRV-COND-ALL
•
RTRV-ALM-ALL
Note
To perform an R8.5.x software download using TL1, you must first have an FTP server or a terminal
emulation program like HyperTerminal running on your workstation. The download (COPY-RFILE)
command is different when downloading software to a gateway network element (GNE) or an end
network element (ENE) under the following conditions:
emulation program like HyperTerminal running on your workstation. The download (COPY-RFILE)
command is different when downloading software to a gateway network element (GNE) or an end
network element (ENE) under the following conditions:
•
FTP is being used.
•
Server is set up with a login and password of FTPUSER1 and FTPUSERPASSWORD1.
•
FTP server has an IP address of 10.1.1.1.
•
FTP server is running on the standard FTP port.
Purpose
This procedure upgrades the software to Software R8.5.x using TL1
rather than CTC.
rather than CTC.
Tools/Equipment
PC or UNIX workstation
Prerequisite Procedures
NTP-U230 Preparation for Upgrading to Release 8.5.x, page 3
NTP-U231 Back Up the ONS 15310-MA Software Database, page 5
NTP-U231 Back Up the ONS 15310-MA Software Database, page 5
Required/As Needed
Optional
Onsite/Remote
Onsite or remote (but in the presence of the workstation)
Security Level
Superuser