Cisco Cisco Unified MeetingPlace 8.5 Guía De Instalación Rápida
Administration Center Page References for Cisco Unified MeetingPlace
Usage Configuration Page
80
Usage Configuration Page
To find this page, select System Configuration > Usage Configuration.
Table 55
Field Reference: Usage Configuration Page
Field
Description
Usage Configuration
Attendant phone
Phone number that callers are routed to if they do not press a number at a voice prompt
or press 0 for operator assistance.
or press 0 for operator assistance.
1
Tip
Make sure that the people at this phone number are available and trained to
provide assistance for Cisco Unified MeetingPlace.
provide assistance for Cisco Unified MeetingPlace.
Restriction: The + character is allowed only as the first character in the field.
24-hour time
Whether to show meeting times by a 24-hour clock.
Default: No
Dial attendant on timeout
Whether callers are transferred to the attendant in the following situations:
•
Caller dials 0 for operator assistance.
•
Caller does not enter a number at a voice prompt.
Default: No
Language 1
Language 2
Language 3
Language 4
Enabled languages. The
Language 1
field sets the default system-wide language.
•
If the languages license is installed, then the number of active language fields (up to
four fields) is determined by the number of installed languages.
four fields) is determined by the number of installed languages.
•
If the languages license is not installed, then only the
Language 1
field appears.
Default: English (US)
Guests can lock and record
meetings
meetings
If set to No, then guest users cannot lock or record meetings.
If set to Yes:
•
Guests can lock meetings.
•
If the
Can record meetings
field in the preconfigured
is also set to Yes,
then guests can use the TUI
6
to start and stop the meeting recording. Guests cannot
start and stop recordings from the web meeting room, because only meeting
moderators may do so.
moderators may do so.
Route calls to meeting ID that
matches DID
matches DID
Whether to enable the DID
2
feature, which routes incoming calls directly to meetings
based on DID and DNIS
3
. When the DID feature is enabled, the caller is routed to the
meeting ID that is equal to the DID phone number.
See the
module.
Security
Minimum profile password length Number of numeric characters required in the
Profile password
for each user.
Restriction: This field does not apply to Directory Service users. See the
module.
Default: 5