Cisco Cisco MeetingPlace Instant Messaging Guía De Instalación Rápida
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Video Conferencing with H.323 Endpoints
14
How to Configure the Cisco IOS Gatekeeper
Perform one of the following tasks, depending on which device provides dial plan resolution for your
network:
network:
•
•
Configuring the Cisco IOS Gatekeeper: Dial Plan Resolution Provided By Gatekeeper
Choose this configuration option if the Cisco IOS gatekeeper provides dial plan resolution for all devices
in your network.
in your network.
Before You Begin
•
Configure voice call control. See the
.
•
Configure the gatekeeper Cisco Unified Communications Manager. For instructions on adding the
gatekeeper, see the Cisco Unified Communications Manager online help.
gatekeeper, see the Cisco Unified Communications Manager online help.
•
You perform this task in the Cisco IOS command-line interface (CLI) of the router. For more
information about the Cisco IOS commands used in this procedure, see the Cisco IOS Commands
Master List for your Cisco IOS release.
information about the Cisco IOS commands used in this procedure, see the Cisco IOS Commands
Master List for your Cisco IOS release.
Procedure
Step 1
On the Cisco router, enter privileged EXEC mode or any other security level set by a system
administrator. Enter your password if prompted.
administrator. Enter your password if prompted.
Router# enable
Step 2
Enter global configuration mode.
Router# configure terminal
Step 3
Enter gatekeeper configuration mode.
Router# gatekeeper
Step 4
Define the zone controlled by the gatekeeper.
Router(config-gk)# zone local gk-zone-name domain-name
Step 5
Specify which subnets the gatekeeper will accept discovery and registration messages sent by endpoints
in those subnets.
in those subnets.
Router(config-gk)# no zone subnet gk-zone-name default enable
Router(config-gk)# zone subnet gk-zone-name subnet1-address{/bits-in-mask | mask-address}
enable
Router(config-gk)# zone subnet gk-zone-name subnet2-address{/bits-in-mask | mask-address}
enable