Fujifilm Uvijet LL Hoja De Datos Del Producto
Uvijet LL
LED UV Curing Ink System for Acuity LED 1600 Hybrid Printers
PRODUCT INFORMATION
Features
• LED UV curing ink system
• Designed for use on the Acuity LED 1600 hybrid
• Designed for use on the Acuity LED 1600 hybrid
printer
• Fast cure for high production output
• Superb flexibility on roll media
• Excellent adhesion range
• Intense colours with a wide gamut
• Satin finish
• CMYKLcLm plus White and Clear colour set
• Excellent inter-coat lay for back lit and solid prints
• Recommended for indoor and short-term external
• Superb flexibility on roll media
• Excellent adhesion range
• Intense colours with a wide gamut
• Satin finish
• CMYKLcLm plus White and Clear colour set
• Excellent inter-coat lay for back lit and solid prints
• Recommended for indoor and short-term external
applications
Ink Properties
The Uvijet LL ink range is a high quality UV curable
inkjet system designed for piezo drop-on-demand
printheads. The ink has been specially developed for
Acuity LED 1600 printers and offers excellent dot
reproduction and will adhere to a wide range of rigid
and flexible uncoated materials.
inkjet system designed for piezo drop-on-demand
printheads. The ink has been specially developed for
Acuity LED 1600 printers and offers excellent dot
reproduction and will adhere to a wide range of rigid
and flexible uncoated materials.
Colour Range
LL052
Yellow
LL867
Magenta
LL215
Cyan
LL004
Black
LL255
Light Cyan
LL335
Light Magenta
LL021
White
LL391
Clear
LL017 UV Flushing Solution
Supplied in 600ml pouches.
Application Range
Uvijet LL inks are specifically formulated to maximise
the performance of the Fujifilm Acuity LED 1600 UV
curing printer. Uvijet LL inks are designed to decorate
and provide excellent adhesion to a wide range of
uncoated flexible and rigid media up to 13mm thick.
the performance of the Fujifilm Acuity LED 1600 UV
curing printer. Uvijet LL inks are designed to decorate
and provide excellent adhesion to a wide range of
uncoated flexible and rigid media up to 13mm thick.
Performance of ink on substrate may vary across
substrate manufacturers. When printing clear ink, some
media may be prone to embrittlement due to the
increased build.
substrate manufacturers. When printing clear ink, some
media may be prone to embrittlement due to the
increased build.
The Acuity LED 1600 printer has been designed to print
high quality short run work previously carried out by
either screen or offset printing processes.
high quality short run work previously carried out by
either screen or offset printing processes.
Media Type
Adhesion Characteristics
Self Adhesive PVC
PVC Banner
Polycarbonate
(A) will improve adhesion to
Styrene
(A) will improve adhesion
to
PETG
Fluted Polypropylene
(B) will improve adhesion
to
Polyethylene
(B) will improve adhesion
to
PVC Foam Board
Display Board
Semi Rigid PVC
Excellent
Good Fair
A = ZE700 Fusion Ultra may optimise performance
B = ZE720 Fusion Adhesion Master may optimise performance
B = ZE720 Fusion Adhesion Master may optimise performance
Available in 1 litre containers.
THE END USER MUST DETERMINE THE
SUITABILITY OF THIS PRODUCT FOR THE
INTENDED USE PRIOR TO PRODUCTION.
SUITABILITY OF THIS PRODUCT FOR THE
INTENDED USE PRIOR TO PRODUCTION.
Curing
Excellent cure and adhesion are achieved immediately
upon print and UV curing. However, maximum
adhesion, chemical, scuff and scratch resistance may
not be obtained until 24 hours after initial curing.The
actual level of cure will depend upon ink thickness,
substrate and the UV curing lamps being used.
Superior through cure may be obtained by reducing the
print speed by selection of an alternative print mode to
increase the overall UV dose.
upon print and UV curing. However, maximum
adhesion, chemical, scuff and scratch resistance may
not be obtained until 24 hours after initial curing.The
actual level of cure will depend upon ink thickness,
substrate and the UV curing lamps being used.
Superior through cure may be obtained by reducing the
print speed by selection of an alternative print mode to
increase the overall UV dose.
Pre-production Tests
Uvijet LL ink is formulated to give excellent adhesion to
most major brands of plastic material. Polyolefins
should have a surface energy level of 42 dynes/cm or
higher. However it is strongly recommended that all
substrates are tested before a commercial run. For
information on adhesion promoters refer to the Uvijet
Fusion Primer range.
most major brands of plastic material. Polyolefins
should have a surface energy level of 42 dynes/cm or
higher. However it is strongly recommended that all
substrates are tested before a commercial run. For
information on adhesion promoters refer to the Uvijet
Fusion Primer range.