SINGER 1507WC Manual De Instrucciónes

1. Take off the all purpose foot and attach the buttonhole foot.
2. Measure diameter and thickness of button and add 0.3 cm

(1/8") for bar tacks; mark buttonhole size on fabric.

3. Place fabric under the foot, so that marking

on the

buttonhole foot aligns with starting marking on fabric. Lower

the foot, so that the buttonhole center line marked on the

fabric aligns with the center of the buttonhole foot.

Adjust the stitch length dial in the "        " to set stitch density.

Density varies according to the fabric.

Always test sew a buttonhole on the fabric you are using to

sew the buttonhole.

Follow the 4-step sequence changing from one step to another

with the stitch pattern selector dial. Take care not to sew too

many stitches in stages 2 and 4. Use seam ripper and cut

buttonhole open from both ends towards the middle.

-Slightly reducing upper thread tension will produce better results.
-Use a backing for fine or stretchy fabrics.
-It is advisable to use heavy thread or cord for stretch or knit

fabrics.

-The zig-zag should sew over the heavy thread or cord. (5)

48

0

1

2

3

4