Cisco Cisco StadiumVision Mobile Manual De Mantenimiento
NOTE: The provisioning and registration process uses a random
wait time to prevent large number of devices sending requests to
the servers at the same time. As a result, the time for each SV-4K
and DMP-2K device to finish the startup sequence will be
different.
wait time to prevent large number of devices sending requests to
the servers at the same time. As a result, the time for each SV-4K
and DMP-2K device to finish the startup sequence will be
different.
Table 21. SV-4K and DMP-2K Startup Task Sequence
Startup Task
TV Display:
SV-4K and DMP-2K
obtains IP address from
DHCP server.
obtains IP address from
DHCP server.
SV-4K and DMP-2K
contacts the Cisco
StadiumVision Director
server.
contacts the Cisco
StadiumVision Director
server.
Err LED blinks for a
short period (normal).
short period (normal).
SV-4K and DMP-2K
reboots.
reboots.
IMPORTANT NOTE: During the initial provision process, or after factory
reset, the SV-4K and DMP-2K DMP will reboot multiple times before completing
the process. Do not interrupt. This can take several minutes.
the process. Do not interrupt. This can take several minutes.
Firmware upgrade
message
message
The following message appears if firmware upgrade is needed:
Current system version is out of date. Restart and update!
48 of 80
© Cisco Systems, Inc. All rights reserved.