APC NetShelter ES Enclosure 40U AR500 Manual De Usuario
Los códigos de productos
AR500
11
Caged nuts
During installation of equipment in you enclosure, you may
need to install or remove caged nuts.
need to install or remove caged nuts.
Warning
Install caged nuts horizontally; that is, the ears of the caged
nut should engage the sides of the mounting hole. Do NOT
install caged nuts with the ears engaging the top and
bottom of the mounting hole.
nut should engage the sides of the mounting hole. Do NOT
install caged nuts with the ears engaging the top and
bottom of the mounting hole.
Installing caged
nuts
1. Install caged nuts on the back of the mounting rails, oppo-
site the equipment to be mounted.
2. Insert the caged nut into the mounting hole by hooking one
ear of the caged nut through the far side of the hole.
3. Place the caged nut tool (included) on the other ear of the
caged nut and pull forward to snap it into position.
Removing caged
nuts
1. Remove any attached screw.
2. From the outside of the rail, hook the caged nut tool along
2. From the outside of the rail, hook the caged nut tool along
an ear of the caged nut and press inward to pinch the ear.
3. When the ear is clear of the mounting hole, push the caged
nut gently through the hole. Grasp the caged nut before
releasing the tool.
releasing the tool.