Cisco Cisco D9824 Advanced Multi Decryption Receiver Guía De Instalación
Setting up Input Information
78-4039426-01 Rev D
149
Viewing PSI Frequency Information
From the user interface of the D9824, click Input > Stream Details > PSI Frequency.
The PSI Frequency page is displayed.
The PSI Frequency page is displayed.
You cannot make any changes in the PSI Frequency table and can only view the
available frequency plans stored in the receiver. The following is a list of the various
columns:
available frequency plans stored in the receiver. The following is a list of the various
columns:
Abbreviation
Description
Transport Stream ID
Displays the transport ID.
Frequency (GHz)
Displays the downlink frequency, in GHz (0.0 to 15.0 GHz).
Symbol Rate (MSym)
Displays the symbol rate, in Mbps.
Orbital Position
Displays the orbital position of the satellite, in degrees
(East of West).
(East of West).
Polarization
Displays the polarity of the received signal (H,V, or Off).
Flag
Displays the satellite position (in degrees), in combination
with the direction (East or West).
with the direction (East or West).
FEC
Indicates the Forward Error Correction inner code rate
(1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9, or 9/10).
(1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9, or 9/10).
RF Modulation
Indicates the modulation of the signal (QPSK DVB-S, QPSK
DVB-S2, 8PSK DVB-S2 or 16QAM DVB-S2).
DVB-S2, 8PSK DVB-S2 or 16QAM DVB-S2).
Network ID
Displays the original network ID.