Cisco Cisco D9824 Advanced Multi Decryption Receiver Guía De Instalación
Chapter 6 Service and Maintenance
220
78-4039426-01 Rev D
Front Panel LEDs
To help signal the status of operation or the presence of an alarm, the D9824 receiver
makes use of front panel LEDs. The photograph below shows the location of the
LEDs on the front panel of the D9824 receive.
makes use of front panel LEDs. The photograph below shows the location of the
LEDs on the front panel of the D9824 receive.
The functions of the LEDs are described in the table below.
LED
Signal State/Color Explanation
ALARM
Red
Solid for five seconds indicates a Warning.
Red
Flashing indicates an Alarm.
SIGNAL
Green
Solid indicates all of the following conditions:
all RF inputs are enabled, all inputs are locked to
a signal, and are not muted.
a signal, and are not muted.
all routed ASI outputs are operating without an
error.
error.
Green
Flashing indicates one of the following conditions:
difficulty with an input, route or output.
one or more RF inputs, or the ASI input are not
synchronized.
synchronized.
one or more ASI outputs are routed, but muted
by a fault condition.
by a fault condition.
no RF signal is present or detected, or it is muted.
receiver is not authorized to receive the program.