Cisco Cisco Aironet 1200 Access Point Guía De Instalación

Follow these steps to mount the access point on a horizontal or vertical 
surface.

Use the mounting bracket as a template to mark the locations of the four 
mounting holes.

Drill one of the following sized holes at the locations you marked:

3/16 in. (4.7 mm) if you are using wall anchors

1/8 in. (6.3 mm) if you are not using wall anchors

Install the anchors into the wall if you are using them. Otherwise, go to 
Step 4.

Secure the mounting bracket to the surface using the #8 fasteners.

On a vertical surface, be sure to mount the bracket with its 
security hasp facing down.

Attach the access point to the mounting bracket.