Cisco Cisco Aironet 1200 Access Point Guía De Instalación
4
78-16238-04
Enabling the Radio Interfaces
In Cisco IOS Release 12.3(4)JA and later, the access point radios are disabled
by default, and there is no SSID. You must create an SSID and enable the
radios before the access point will allow wireless associations from other
devices. These changes to the default configuration improve the security of
newly installed access points.
by default, and there is no SSID. You must create an SSID and enable the
radios before the access point will allow wireless associations from other
devices. These changes to the default configuration improve the security of
newly installed access points.
To enable the radio interfaces using the access point’s graphical user interface
(GUI), follow these instructions:
(GUI), follow these instructions:
1.
Use your internet browser to access your access point. The default login
and password is Cisco. Both are case-sensitive.
and password is Cisco. Both are case-sensitive.
2.
When the Summary Status page displays, click Express > SSID
Manager. The Global SSID Manager page appears.
Manager. The Global SSID Manager page appears.
3.
Create an SSID for each radio interface. An SSID can be any
alphanumeric, case-sensitive entry from 2 to 32 characters. The
following six characters are not allowed: ?, “, $. [. \, and +. In addition,
the following three characters cannot be the first character: !, #, and ;.
alphanumeric, case-sensitive entry from 2 to 32 characters. The
following six characters are not allowed: ?, “, $. [. \, and +. In addition,
the following three characters cannot be the first character: !, #, and ;.
4.
Click Apply.
5.
Click Network Interfaces > Radio 802.11b or Network Interfaces >
Radio 802.11g and the Radio Status page appears.
Radio 802.11g and the Radio Status page appears.
6.
Click Settings and the Radio Settings Page appears.
7.
Click Enable in the Enable Radio field.