Cisco Cisco Aironet 1200 Access Point Guía De Instalación
42
78-16238-04
1.
Decide where you want to mount the access point.
2.
Attach two rail clips to the ceiling’s T-rail.
3.
Use the mounting bracket to adjust the distance between the rail clips so
that they align with the holes in the mounting bracket.
that they align with the holes in the mounting bracket.
4.
Use a standard screwdriver to tighten the rail clip studs in place on the
T-rail. Do not overtighten.
T-rail. Do not overtighten.
5.
Install a plastic spacer on each rail clip stud. The spacer’s legs should
contact the ceiling grid T-rail.
contact the ceiling grid T-rail.
6.
Attach the mounting bracket to the rail clip studs and start a 1/4-20 nut
with attached washer on each stud.
with attached washer on each stud.
7.
Use a wrench or pliers to tighten the nuts. Do not overtighten.
8.
Attach the access point to the mounting bracket.
Attaching the Access Point to the Mounting Bracket
Follow these steps to attach the access point to the mounting bracket.
1.
Line up the three mounting pins on the access point with the large ends
of the keyhole-shaped holes on the mounting bracket.
of the keyhole-shaped holes on the mounting bracket.
2.
Insert the access point into the keyhole shaped holes and maintain a
slight pressure to hold it in place.
slight pressure to hold it in place.