Cisco Cisco Tunnel Terminating Gateway (TTG)
MME Service Configuration Mode Commands
local-cause-code-mapping restricted-zone-code ▀
Command Line Interface Reference, StarOS Release 18 ▄
7351
local-cause-code-mapping restricted-zone-code
Configures the reject cause code to send to a UE when a procedure fails.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping restricted-zone-code emm-cause-code { eps-service-not-allowed-
in-this-plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
in-this-plmn | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-not-
allowed-in-this-tracking-area | tracking-area-not-allowed }
default local-cause-code-mapping restricted-zone-code
default local-cause-code-mapping restricted-zone-code
Returns the cause code mapping to its default value:
no-suitable-cell-in-tracking-area
.
restricted-zone-code emm-cause-code emm_cause_code
Specifies the EPS Mobility Management (EMM) cause code to return when a UE requests access to a
restricted zone.
restricted zone.
emm_cause_code
must be one of the following options:
eps-service-not-allowed-in-this-plmn
no-suitable-cell-in-tracking-area
- Default.
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when a UE procedure fails, such as when the
UE requests access to a restricted zone. By default, the MME sends the UE the #15 - No Suitable Cells in
Tracking Area cause code when encountering this condition.
UE requests access to a restricted zone. By default, the MME sends the UE the #15 - No Suitable Cells in
Tracking Area cause code when encountering this condition.