Cisco Cisco Web Security Appliance S160 Guía Del Usuario
25-17
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 25 Configuring Network Settings
Configuring Transparent Redirection
Configuring Transparent Redirection
When you configure the Web Security appliance web proxy service in transparent
mode, you must connect the appliance to an L4 switch or a WCCP v2 router, and
you must configure the appliance so it knows to which device it is connected. You
configure the device on the Network > Transparent Redirection page.
mode, you must connect the appliance to an L4 switch or a WCCP v2 router, and
you must configure the appliance so it knows to which device it is connected. You
configure the device on the Network > Transparent Redirection page.
Figure 25-5
Network > Transparent Redirection Page
On this page, you can choose the device that transparently redirects traffic to the
appliance, either an L4 switch or a WCCP router. When you choose an L4 switch
as the device, there is nothing else to configure on this page.
appliance, either an L4 switch or a WCCP router. When you choose an L4 switch
as the device, there is nothing else to configure on this page.
However, when you choose a WCCP router as the device, you must create at least
one WCCP service.
one WCCP service.
Working with WCCP Services
A WCCP service is an appliance configuration that defines a service group to a
WCCP v2 router. It includes information such as the service ID and ports used.
Service groups allow a web proxy to establish connectivity with a WCCP router
and to handle redirected traffic from the router.
WCCP v2 router. It includes information such as the service ID and ports used.
Service groups allow a web proxy to establish connectivity with a WCCP router
and to handle redirected traffic from the router.
You can create WCCP services that use the following service types:
example.com> commit