Cisco Cisco Web Security Appliance S190 Guía Del Usuario
1-6
AsyncOS 8.1 for Cisco Web Security User Guide
8.0
Chapter 1 Introduction to the Product and the Release
Using the Appliance Web Interface
Some buttons and links in the web interface cause additional windows to open. Therefore, you may need
to configure the browser’s pop-up blocking settings in order to use the web interface.
to configure the browser’s pop-up blocking settings in order to use the web interface.
Note
Only use one browser window or tab at a time to edit the appliance configuration. Also, do not edit the
appliance using the web interface and the CLI at the same time. Editing the appliance from multiple
places concurrently results in unexpected behavior and is not supported.
appliance using the web interface and the CLI at the same time. Editing the appliance from multiple
places concurrently results in unexpected behavior and is not supported.
Accessing the Appliance Web Interface
Step 1
Open a browser and enter the IP address (or hostname) of the Web Security appliance. If the appliance
has not been previously configured, use the default settings:
has not been previously configured, use the default settings:
https://192.168.42.42:8443
-or-
http://192.168.42.42:8080
where
192.168.42.42
is the default IP address, and
8080
is the default admin port setting for HTTP,
and
8443
is default admin port for HTTPS.
Otherwise, if the appliance is currently configured, use the IP address (or hostname) of the M1 port.
Note
You must use a port number when connecting to the appliance (by default, port 8080). Failing to specify
a port number when accessing the web interface results in a default port 80, Proxy Unlicensed error page.
a port number when accessing the web interface results in a default port 80, Proxy Unlicensed error page.
Step 2
When the appliance login screen appears, enter the username and password to access the appliance. By
default, the appliance ships with the following username and password:
default, the appliance ships with the following username and password:
•
Username:
admin
•
Password:
ironport
Committing Changes in the Web Interface
Note
You can make multiple configuration changes before you commit all of them.
Step 1
Click the Commit Changes button.
Step 2
Enter comments in the Comment field if you choose.
Step 3
Click Commit Changes.