Cisco Cisco Web Security Appliance S170 Guía De Instalación
11
7
Temporarily Change Your IP
Address
To connect to the Cisco S380 and Cisco S680, you must
temporarily change the IP address of your computer.
temporarily change the IP address of your computer.
Note
Make a note of your current IP configuration settings
as you will need to revert to these settings after you
finish the configuration.
as you will need to revert to these settings after you
finish the configuration.
For Windows
Step 1
Connect your laptop to the Management port using the
Ethernet cable included in the system box. The Cisco
S380 and Cisco S680 appliance uses the Management
port only. See
Ethernet cable included in the system box. The Cisco
S380 and Cisco S680 appliance uses the Management
port only. See
.
Step 2
Go to the Start menu and choose Control Panel.
Step 3
Double-click Network and Sharing Center.
Step 4
Click Local Area Connection and then click Properties.
Step 5
Select Internet Protocol (TCP/IP) and then click
Properties.
Properties.
Step 6
Select Use the Following IP Address.
Step 7
Enter the following changes:
–
IP Address: 192.168.42.43
–
Subnet Mask: 255.255.255.0
–
Default Gateway: 192.168.42.1
Step 8
Click OK and Close to exit the dialog box.