Cisco Cisco Web Security Appliance S680 Guía De Instalación
13
8
Connect to the Appliance
Plug the Ethernet cables into the appropriate ports on the back
panel of the Cisco S380 and Cisco S680 appliance.
panel of the Cisco S380 and Cisco S680 appliance.
•
The proxy ports are labeled P1 and P2.
–
P1 only enabled: When only P1 is enabled, connect it to
the network for both incoming and outgoing traffic.
the network for both incoming and outgoing traffic.
–
P1 and P2 enabled: When both P1 and P2 are enabled,
you must connect P1 to the internal network and P2 to
the Internet.
you must connect P1 to the internal network and P2 to
the Internet.
•
The traffic monitor ports are labeled T1 and T2.
–
Simplex tap: Ports T1 and T2; one cable for all packets
destined for the Internet (T1) and one cable for all
packets coming from the Internet (T2).
destined for the Internet (T1) and one cable for all
packets coming from the Internet (T2).
–
Duplex tap: Port T1; one cable for all incoming and
outgoing traffic.
outgoing traffic.