Cisco Cisco Web Security Appliance S680 Guía Del Usuario
3-8
Cisco AsyncOS 8.0.6 for Web User Guide
Chapter 3 Connect the Appliance to a Cloud Web Security Tower
Configuring the Cloud Connector
Step 5. Configure Cloud Connector Settings
Note
You can return to these settings later by navigating to Network>Cloud Connector.
Related topics
•
•
Step 6. Configure Network Interfaces and Wiring
Related topics
•
Setting
Description
Cloud Web Security Proxy Servers
The address of the Cloud Proxy Server
(CPS), for example,
proxy1743.scansafe.net.
(CPS), for example,
proxy1743.scansafe.net.
Failure Handling
If AsyncOS fails to connect to a Cloud
Web Security tower, either Connect
directly to the internet or Drop
requests.
Web Security tower, either Connect
directly to the internet or Drop
requests.
Cloud Web Security Authorization Scheme
Method for authorizing transactions:
•
Web Security Appliance public
facing IPv4 address
facing IPv4 address
•
Authorization key included with
each transaction. You can generate
an authorization key within the
Cisco Cloud Web Security Portal.
each transaction. You can generate
an authorization key within the
Cisco Cloud Web Security Portal.
Setting
Description
Ethernet Port
If you configure the M1 interface for management traffic only, you must configure
the P1 interface for data traffic. However, you can configure the P1 interface even
when the M1 interface is used for both management and data traffic.
the P1 interface for data traffic. However, you can configure the P1 interface even
when the M1 interface is used for both management and data traffic.
IP Address
The IPv4 address to use to manage the Web Security appliance.
Network Mask
The network mask to use when managing the Web Security appliance on this
network interface.
network interface.
Hostname
The hostname to use when managing the Web Security appliance on this network
interface.
interface.