Cisco Cisco Web Security Appliance S160 Guía Del Usuario
27-2
Cisco IronPort AsyncOS 7.7 for Web User Guide
Chapter 27 Command Line Interface
Using the Command Line Interface
•
Serial connection. Start a terminal session with the communication port on your personal computer
that the serial cable is connected to.
that the serial cable is connected to.
Log in to the appliance by entering the username and password below.
•
Username:
admin
•
Password:
ironport
For example:
Working with the Command Prompt
The top-level command prompt consists of the fully qualified hostname, followed by the greater than (
>
)
symbol, followed by a space. For example:
When running commands, the CLI requires input from you. When the CLI is expecting input, the prompt
displays the default values enclosed in square brackets (
displays the default values enclosed in square brackets (
[]
) followed by the greater than (
>
) symbol.
When there is no default value, the brackets are empty.
For example:
When there is a default setting, the setting is displayed within the command-prompt brackets. For
example:
example:
When a default setting is shown, typing Return is equivalent to accepting the default:
login: admin
password: ironport
example.com>
example.com> routeconfig
Choose a routing table:
- MANAGEMENT - Routes for Management Traffic
- DATA - Routes for Data Traffic
[]>
example.com> setgateway
Warning: setting an incorrect default gateway may cause the current connection
to be interrupted when the changes are committed.
Enter new default gateway:
[172.xx.xx.xx]>