Cisco Cisco Web Security Appliance S680 Guía Del Usuario
3-9
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 3 Deployment
Connecting the Appliance to a WCCP Router
Configuring the Web Security Appliance
A WCCP service is an appliance configuration that defines a service group to a
WCCP v2 router. It includes information such as the service ID and ports used.
Service groups allow a web proxy to establish connectivity with a WCCP router
and to handle redirected traffic from the router.
WCCP v2 router. It includes information such as the service ID and ports used.
Service groups allow a web proxy to establish connectivity with a WCCP router
and to handle redirected traffic from the router.
Create WCCP services on the Network > Transparent Redirection page. The
WCCP services you create determine how you configure the WCCP routers. For
more information about creating WCCP services, see
WCCP services you create determine how you configure the WCCP routers. For
more information about creating WCCP services, see
Note
You can enable the standard service (also known as the “web-cache” service)
during system setup, and you can configure different or additional WCCP service
groups after you run the System Setup Wizard.
during system setup, and you can configure different or additional WCCP service
groups after you run the System Setup Wizard.
Configuring the WCCP Router
After you create at least one WCCP service in the Web Security appliance, you
can configure the WCCP router(s) in the network.
can configure the WCCP router(s) in the network.
Use the following syntax for enabling WCCP on the router:
ip wccp version 2
ip wccp service_group
interface interface_type_number
ip wccp service_group redirect direction
ip wccp service_group password password
Enter one of the following values for the service_group variable:
•
web-cache. Enter “web-cache” when the appliance WCCP service uses the
standard service.
standard service.
•
Service ID number. Enter a number from 0 to 255 when the appliance WCCP
service uses a dynamic service ID. The number should match the service ID
number used in the appliance.
service uses a dynamic service ID. The number should match the service ID
number used in the appliance.