Cisco Cisco Web Security Appliance S680 Guía Del Usuario
26-7
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 26 System Administration
Support Commands
The Support and Help > Packet Capture page displays the list of complete packet
capture files stored on the hard drive. When a packet capture is running, the web
interface shows the status of the capture in progress by showing the current
statistics, such as file size and time elapsed.
capture files stored on the hard drive. When a packet capture is running, the web
interface shows the status of the capture in progress by showing the current
statistics, such as file size and time elapsed.
You can download the packet capture files using the Download button in the web
interface, or by connecting to the appliance using FTP and retrieving them from
the captures directory.
interface, or by connecting to the appliance using FTP and retrieving them from
the captures directory.
In the CLI, use the
packetcapture
command.
In the web interface, select the Packet Capture option under the Support and Help
menu.
menu.
Note
The packet capture feature is similar to the Unix tcpdump command.
Starting a Packet Capture
To start a packet capture in the CLI, run the
packetcapture > start
command.
If you need to stop a running packet capture, run the
packetcapture > stop
command.
To start a packet capture in the web interface, select the Packet Capture option
under the Support and Help menu, and then click Start Capture. To stop a
running capture, click Stop Capture.
under the Support and Help menu, and then click Start Capture. To stop a
running capture, click Stop Capture.
Note
The web interface only displays packet captures started in the web interface, not
from the CLI. Similarly, the CLI only displays the status of a current packet
capture run started in the CLI.
from the CLI. Similarly, the CLI only displays the status of a current packet
capture run started in the CLI.
Editing Packet Capture Settings
To edit the packet capture settings in the CLI, run the
packetcapture > setup
command.
To edit packet capture settings in the web interface, select the Packet Capture
option under the Support and Help menu, and then click Edit Settings.
option under the Support and Help menu, and then click Edit Settings.