Cisco Cisco Web Security Appliance S680 Guía Del Usuario
26-21
Cisco IronPort AsyncOS 7.0 for Web User Guide
OL-23079-01
Chapter 26 System Administration
Configuring the Return Address for Generated Messages
By default, when you list the addresses that can access the appliance, the IP
address of your current machine is listed as the first address in the allow list. You
cannot delete the IP address of your current machine from the allow list.
address of your current machine is listed as the first address in the allow list. You
cannot delete the IP address of your current machine from the allow list.
Configuring the SSL Ciphers for Administrator Access
Using the
adminaccessconfig > strictssl
CLI command, you can configure the
appliance so administrators log into the web interface on port 8443 using stronger
SSL ciphers (greater than 56 bit encryption).
SSL ciphers (greater than 56 bit encryption).
When you configure the appliance to require stronger SSL ciphers, the change
only applies to administrators accessing the appliance using HTTPS to manage
the appliance. It does not apply to other network traffic connected to the Web
Proxy using HTTPS.
only applies to administrators accessing the appliance using HTTPS to manage
the appliance. It does not apply to other network traffic connected to the Web
Proxy using HTTPS.
Configuring the Return Address for Generated
Messages
Messages
You can configure the return address for mail generated by AsyncOS for reports.
You can specify the display, user, and domain names of the return address. You
can also choose to use the Virtual Gateway domain for the domain name.
You can specify the display, user, and domain names of the return address. You
can also choose to use the Virtual Gateway domain for the domain name.
Configure the return address on the System Administration > Return Addresses
page.
page.
Figure 26-11
Configuring Return Addresses
To configure the return address for system-generated email messages:
Step 1
Navigate to the System Administration > Return Addresses page.
Step 2
Click Edit Settings.