Cisco Cisco Web Security Appliance S690 Guía Del Usuario

22-3

AsyncOS 9.1.1 for Cisco Web Security Appliances User Guide

Chapter 22 Perform System Administration Tasks

Working with Feature Keys

Loading the Appliance Configuration File

Caution

Loading configuration will permanently remove all of your current configuration settings. It is strongly
recommended that you save your configuration before performing these actions.

Note

If a compatible configuration file is based on an older version of the set of URL categories than the
version currently installed on the appliance, policies and identities in the configuration file may be
modified automatically.

Step 1

Choose System Administration > Configuration File.

Step 2

Choose Load Configuration options and a file to load. Note:

Files with masked passphrases cannot be loaded.

Files must have the following header:

<?xml version=”1.0” encoding=”ISO-8859-1”?> <!DOCTYPE config SYSTEM “config.dtd”>

and a correctly formatted config section:

<config> ...

your configuration information in valid XML

</config>

Step 3

Click Load.

Step 4

Read the warning displayed. If you understand the consequences of proceeding, click Continue.

Resetting the Appliance Configuration to Factory Defaults

You can choose whether or not to retain existing network settings when you reset the appliance
configuration.

This action does not require a commit.

Before You Begin

Save your configuration to a location off the appliance.

Step 1

Choose System Administration > Configuration File.

Step 2

Scroll down to view the Reset Configuration section.

Step 3

Read the information on the page and select options.

Step 4

Click Reset.

Working with Feature Keys

Feature keys enable specific functionality on your system.Keys are specific to the serial number of your
appliance (you cannot re-use a key from one system on another system).