Cisco Cisco Catalyst 6500 Series 7600 Series ASA Services Module Guía De Información
Cisco ASA Compatibility
ASA and Cisco Application Policy Infrastructure Controller (APIC) Compatibility
21
ASA and Cisco Application Policy Infrastructure Controller
(APIC) Compatibility
(APIC) Compatibility
The following table lists the supported ASA models, ASA software, and APIC versions.
Cisco Nexus 7000
Note:
You can use F1-series line cards for the
cluster control link, but we do not recommend using
them for data EtherChannels in Spanned
EtherChannel mode due to asymmetric
load-balancing, which can cause performance
degradation for data throughput on the cluster.
them for data EtherChannels in Spanned
EtherChannel mode due to asymmetric
load-balancing, which can cause performance
degradation for data throughput on the cluster.
Cisco NX-OS 5.2(5) and later
9.0(1) and later
Cisco Nexus 6000
Cisco NX-OS 7.0(2)N1(1) and later
9.3(2) and later
Cisco Nexus 5000
Cisco NX-OS 7.0(1) and later
9.1(4) and later
Cisco Nexus 3000
Note:
We do not recommend using this switch for
data EtherChannels in Spanned EtherChannel mode
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
Cisco NX-OS 6.0(2)U6(6) and later
9.6(1) and later
Catalyst 6800 with Supervisor 2T
Cisco IOS 15.1(2)SY5 and later
9.1(5) and later
Catalyst 6500 with Supervisor 32, 720, and
720-10GE
720-10GE
Cisco IOS 12.2(33)SXI7, SXI8, and SXI9 and
later
later
9.0(1) and later
Catalyst 6500 with Supervisor 2T
Cisco IOS 15.1(2)SY5 and later
9.1(5) and later
Catalyst 4500-X
Note:
We do not recommend using this switch for
data EtherChannels in Spanned EtherChannel mode
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
Cisco IOS 3.6(3) and later
9.5(2) and later
Catalyst 4500 with Supervisor 8-E
Cisco IOS XE 3.7(1E) and later
9.5(1) and later
Catalyst 3850
Note:
We do not recommend using this switch for
data EtherChannels in Spanned EtherChannel mode
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
due to asymmetric load-balancing, which can cause
performance degradation for data throughput on the
cluster. You can use the switch for the cluster control
link or for interfaces in Individual Interface mode.
Cisco IOS 3.7(3) and later
9.5(2) and later
Catalyst 3750-X
Cisco IOS 15.0(2) and later
9.1(4) and later
External Hardware
External Software
ASA Version