Cisco Cisco MGX-FRSM-HS2 B Serial Frame Service Module Guía De Instalación
9
Cisco Prime Network Analysis Module Catalyst 6500 Series Switch Installation and Configuration Guide
OL-24434-02
Installing and Configuring External Storage
Enter new password:
Confirm new password:
Successfully changed password for user 'root'
root@nam.localdomain# ip address 1.1.1.2 255.255.255.0
root@nam.localdomain# ip gateway 1.1.1.1
root@nam.localdomain# ip http server enable
No web users are configured.
Please enter a web administrator user name [admin]:
New password:
Confirm password:
User admin added.
Starting httpd
root@nam.localdomain#
Optionally you can enable Telnet if needed:
root@nam.localdomain# exsession on
root@nam.localdomain#
Use ping to verify network connectivity to a known address as below:
root@nam.localdomain# ping 3.3.3.3
PING 3.3.3.3 (3.3.3.3) 56(84) bytes of data.
64 bytes from 3.3.3.3: icmp_seq=1 ttl=245 time=8.48 ms
64 bytes from 3.3.3.3: icmp_seq=2 ttl=245 time=2.61 ms
64 bytes from 3.3.3.3: icmp_seq=3 ttl=245 time=2.95 ms
64 bytes from 3.3.3.3: icmp_seq=4 ttl=245 time=2.15 ms
64 bytes from 3.3.3.3: icmp_seq=5 ttl=245 time=2.43 ms
--- 3.3.3.3 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 2.153/3.728/8.483/2.391 ms
root@nam.localdomain#
The NAM is now on the network and the http GUI should be accessible using the management IP address
you just set. Use Firefox or IE7 to access the NAM and confirm connectivity.
you just set. Use Firefox or IE7 to access the NAM and confirm connectivity.
Installing and Configuring External Storage
The Cisco Catalyst 6500 Series Network Analysis Module (WS-SVC-NAM-3) offers external storage
connectivity for extended capture durations and higher capture bandwidths. This connectivity is
provided through two front-panel ports, one Mini Serial Attached SCSI (SAS, SFF-8088), and one Fibre
Channel Over Ethernet (FCoE, SFP+). The external SAS storage array can be directly attached, while
most FCoE arrays require an FCoE switch (such as a Nexus 5000 Series Switch) to connect to a NAM-3.
A Nexus 5000 Series Switch can connect to multiple FC and FCoE storage arrays.
connectivity for extended capture durations and higher capture bandwidths. This connectivity is
provided through two front-panel ports, one Mini Serial Attached SCSI (SAS, SFF-8088), and one Fibre
Channel Over Ethernet (FCoE, SFP+). The external SAS storage array can be directly attached, while
most FCoE arrays require an FCoE switch (such as a Nexus 5000 Series Switch) to connect to a NAM-3.
A Nexus 5000 Series Switch can connect to multiple FC and FCoE storage arrays.
SAS and FCoE connectivity can be used simultaneously. See
for an overview of external data
storage setup.