Cisco Cisco 12000 Series 4-Port OC-12c STM-4c ATM Line Card Guía Para Resolver Problemas

6500−sp# 

pinging addr 11(0xB) 

assigned sap 0x11 

no response from addr 11(0xB)  (Communication between the supervisor 

                                and linecard is broken)

Configure online diagnostics on the line card.

6500(config)#diagnostic level complete      (12.1(8a)EX or above)

4. 

Reseat the line card, and review the test results in order to see if any tests failed.

6500#show diagnostic result module 2 

Current Online Diagnostic Level = Complete

Online Diagnostic Result for Module 2 : PASS 

Online Diagnostic Level when Module 2 came up = Complete

5. 

Optional: Use debug commands in order to inspect SCP download events. These debugs may be run
to check the SCP download events as a line card comes online. This is an example of a module that is
working correctly.

6500#remote login switch

6500−sp#debug scp download module 2

6500−sp#show debug

<snip>

SCP download debugging for slot 2 is on

      start_timer_online_action: Start OIR online timer for slot: 2, 

         time: 1380 sec

     scp_dnld_module 2 : 0 : 0: during state enabled, got event 5(registered)

 @@@ scp_dnld_module 2 : 0 : 0: enabled −> wait_til_boot_ready

 Stop timer

 Start BOOT_RDY timer for 2 with 30000 msec

     scp_dnld_module 2 : 0 : 0: during state wait_til_boot_ready, got event 

        6(boot_ready)

 @@@ scp_dnld_module 2 : 0 : 0: wait_til_boot_ready −> wait_til_downloaded

 Stop timer

 Start DNLD timer for 2 with 120 sec

 (scp_start_download) 2/0

 (scp_start_download) 2/0: Started D/L Process, pid 512

 get_card_image: slot/proc 2/0: UBIN patch image on flash opened 

    (microcode:/LCP_CPGBIT)

 No download needed for card at slot 2

     scp_dnld_module 2 : 0 : 0: during state wait_til_downloaded, got event 

        4(dnld_completed)

 @@@ scp_dnld_module 2 : 0 : 0: wait_til_downloaded −> wait_til_ready

 Stop timer

 Start EXEC_CODE timer for 2 with 90 sec

 Received Run−ready from slot 2

 scp_download_process_teardown() mypid 512, slot/proc 2/0, image_fd −1

     scp_dnld_module 2 : 0 : 0: during state wait_til_ready, got event 

        8(ready)

 @@@ scp_dnld_module 2 : 0 : 0: wait_til_ready −> wait_til_running

 Stop timer

 Start RUN_RDY timer for 5 with 90 sec

     scp_dnld_module 2 : 0 : 0: during state wait_til_running, got 

        event 9(running)

 @@@ scp_dnld_module 2 : 0 : 0: wait_til_running −> wait_til_online

 Stop timer

<snip>

6. 

Updated: Jun 20, 2013

Document ID: 116115