Cisco Cisco UCS C200 M2 High-Density Rack Server Hoja De Datos

All Cisco UCS two CPU socket-capable servers can be upgraded from having one to having two CPUs 
configured or can also support replacement of the CPUs. You will need to order and install a heat sink when 
adding any additional CPU to a server. Instructions for installing the new CPU or replacing CPUs and heat 
sink can be found at the following link:

See the section titled “Replacing CPUs and Heatsinks.”

You can order a replacement motherboard battery. Installation instructions are found at this link:

See the section titled “Replacing the Motherboard RTC Battery.”

Thermal grease must be applied to the top of the CPU where it comes in contact with the heat sink (a 
grease syringe also ships with each CPU spare option kit). Instructions for applying thermal grease are found 
at:

See the section titled “Replacing CPUs and Heatsinks.”

UCSC-MRAID-SC=

SuperCap for Cisco 12G SAS Modular RAID, including all cables.

UCS-300WKIT-240M4=

300 Watt Cable and Kit for UCS C240M4 Rack Server Includes two heat sinks and 

two power cables)

1. This part is included/configured with your UCS server (in some cases, as determined by the configuration of 

your server).

2. Required if ordering the RAID controller as a spare or to replace damaged cables
3. This SD card is blank.
4. This part should be ordered with the purchase of each optional or spare Intel Xeon E5-2600 v3 CPU processor 

kit

NOTE:  Unlike previous generation servers, the C240 M4 has tool-less CPU sockets, so 
no separate tools (such as “pick n place” tools) are required to add or replace CPUs.