Cisco Cisco UCS C3260 Rack Server Hoja De Datos
Cisco UCS C22 M3 High-Density SFF Rack-Mount Server
6
BASE SERVER STANDARD CAPABILITIES and FEATURES
BASE SERVER STANDARD CAPABILITIES and FEATURES
lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
are provided in
Table 1 Capabilities and Features
Capability/Feature
Description
Chassis
Single rack unit (1RU) chassis
CPU
One or two Intel® Xeon E5-2400 v2 or E5-2400 series processor family CPUs
Chipset
Intel C600 chipset
Memory
12 DIMM slots
NIC
Embedded dual-port Intel I350 PCIe-based Gigabit Ethernet controller
Expansion slots
Two riser cards with one PCIe card slot in each riser
■
Riser 1 (controlled by CPU 1)
• Slot 1: PCIe Gen 3 slot, x16 extended connector (Cisco CNIC),
half-length, full-height, with NCSI
1
and Cisco CNIC
2
support. The
Cisco 1225 virtual interface card requires an NCSI slot.
■
Riser 2 (controlled by CPU 2)
• Slot 2: PCIe Gen 3 slot, x8 connector, half-length, half-height, no
NCSI support
Internal storage devices
■
Up to eight 2.5-inch SAS+SATA hot-swappable hard disk drives (HDDs) or
solid state drives (SSDs)
■
One connector on the motherboard that can accommodate a USB 2.0
drive. You can order an 8 or 16 GB drive for this connector and use it as
a hypervisor or license dongle. The 8 or 16 GB USB drive comes blank.
Video
The Emulex Pilot 3 Integrated Baseboard Management Controller provides
video:
video:
■
Matrox G200e video controller
■
Integrated 2D graphics core with hardware acceleration
■
Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at
60 Hz
■
24-bit color depth for all resolutions less than 1600x1200
■
8 MB video memory