Cisco Cisco 3G Wireless WAN (GPRS EDGE UMTS HSDPA) High-Speed Interface Card Guía De Información
Q&A
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 19
call).
OTASP activation Failed
SIDHQ-2811-Western#
*Jun 14 19:44:42: %HWIC_CELL-1-MODEM_ACK_FAIL: [Cellular0/2/0] Modem
Ack not received.
Ack not received.
ROUTER#
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
The OTASP number is wrong. The OTASP number is generally *22899, so you should enter
the command as follows
the command as follows
ROUTER#cellular 0/2/0 cdma activate otasp *22899
Account Activation and Provisioning on 3G Wireless HWIC GSM Modem
What information do I need before activating my 3G wireless HWIC GSM modem (HWIC-
3G-GSM)?
You need to get the following information from your service provider to activate the modem:
You need to get the following information from your service provider to activate the modem:
●
APN: Access point name
●
Authentication type: Password Authentication Protocol (PAP) or CHAP
●
Username and password
For the 3G wireless HWIC GSM modem (HWIC-3G-GSM), where can I find the commands
related to personal identification number (PIN) unlock-related commands? Is the
GSM/UMTS SIM card PIN-unlocked command a hidden command?
The SIM lock command is available with Cisco IOS Software Release 12.4(15)T1 and later.
The SIM lock command is available with Cisco IOS Software Release 12.4(15)T1 and later.
SIM Lock/Unlock:
================
cellular x/x/x gsm sim [lock | unlock] <pin>
Band Selection:
===============
cellular x/x/x gsm band <number>
How many profiles can I configure for my GSM modem, and how many are active at any
given time?
You can configure up to 16 profiles, but you can use only one at a given time; you can
configure these profiles by changing the CHAT script:
You can configure up to 16 profiles, but you can use only one at a given time; you can
configure these profiles by changing the CHAT script:
chat-script gsm "" "ATDT*98*2#" TIMEOUT 60 "CONNECT"
The number "2" in this command indicates that profile 2 is active.
What is the command to lock or unlock the SIM on my 3G wireless HWIC (HWIC-3G-
GSM)?
The cellular GSM SIM lock or unlock command follows:
The cellular GSM SIM lock or unlock command follows: