Cisco Cisco Virtualization Experience Client 2111 Guía De Administador
3-17
Cisco Virtualization Experience Client 2112/2212 ICA Administration Guide for WTOS 7.0_214
OL-215152-01
Chapter 3 Configuring Connectivity Options
Advanced Details on Configuring ICA and RDP Connections
Connection Tab
Figure 3-15
shows the Connection tab.
Figure 3-15
Default RDP—Connection
Use the following guidelines on the Connection tab:
•
Connection Description—Enter the descriptive name that is to appear in the connection list (38
characters maximum).
characters maximum).
•
Host Names—Use the list to select the valid DNS server name or the IP address of the server to
which the zero client connection is to be made (you can also use Browse next to the box to make the
selection you want). For example, a list of WTS servers on the local network from which you can
select.
which the zero client connection is to be made (you can also use Browse next to the box to make the
selection you want). For example, a list of WTS servers on the local network from which you can
select.
Tip
The server name may be resolved using one of two mechanisms: DNS, and WINS. DNS uses the
default domain name in the network control panel to attempt to construct an FQDN but will also
try to resolve the name without using the default.
default domain name in the network control panel to attempt to construct an FQDN but will also
try to resolve the name without using the default.
•
VDA—Not supported on Cisco VXC 2112/2212.
•
Console mode—Select to set the RDP connection with Windows Console mode.
•
Display Resolution—Select the display resolution for this connection:
–
Default
–
640 x 480
–
800 x 600
–
1024 x 768
–
1152 x 864
–
1280 x 720
–
1280 x 768
–
1280 x 1024