Cisco Cisco MGX 8880 Media Gateway Notas de publicación
3
Release Notes for Cisco Voice Switch Service Module (VXSM) Release 5.6.10
OL-23364-03
New Features in Release 5.6.10
For Multiple Bearer IP Pool feature, the following commands were added:
Support for Alternative Codec String
Release 5.6.10 introduces support for alternate strings for existing codecs. Presently VXSM supports
only standard codec strings such as PCMU, G.711u, and so on. This feature enables VXSM to use the
alternate strings in addition to the existing standard strings. The following call control protocols support
this feature:
only standard codec strings such as PCMU, G.711u, and so on. This feature enables VXSM to use the
alternate strings in addition to the existing standard strings. The following call control protocols support
this feature:
•
H.248
•
MGCP
The feature supports these codec templates:
•
TGW and Wireline: Supports G.711, G.723, G.723.1a, G.726, G.729, G.729A, and Clear Channel.
•
Cable: Supports G.711 and iLBC.
•
TGW2: Supports G.711, G.726, G.729A, iLBC, and Clear Channel.
•
FMC: Supports G.711, G.726, G.729A, AMR-NB, GSM-EFR, and Clear Channel.
For the Support for Alternative Codec String feature, the following commands were added:
Hold Tone During Warm Transfer
This enhancement introduces a new type of hold tone during a warm transfer. The new tone is played
during the warm transfer period. Only MGCP protocol supports this enhancement.
during the warm transfer period. Only MGCP protocol supports this enhancement.
For the Hold Tone During Warm Transfer feature, the following commands were modified:
–
addBearerPool
Adds bearer pools.
–
cnfBearerPool
Configures the bearer pools.
–
delBearerPool
Deletes a bearer pool.
–
dspBearerPools
Displays all the bearer pools added on a gateway.
–
cnfBearerIPPool
Configures the IPs in a bearer pool.
–
dspBearerIPPools
Displays all the IPs configured under a bearer pool.
–
cnfcodecstring
Specifies the alternate codec strings for VXSM.
–
dspcodecstring
Displays the alternate codec strings for a specific
adaptation type and codec.
adaptation type and codec.
–
cnfvifccode
Configures a specific country code in a voice interface.
–
dspvifccode
Displays country code configured for a specified Voice
Interface.
Interface.
–
dspvifccodes
Displays country code configured for all the Voice
Interface.
Interface.