Cisco Cisco MediaSense Release 8.5(1) Guía De Instalación

Simple Mail Transfer Protocol (SMTP) is only used for email notifications and this feature

is not required by Unified MCP.

If you want to configure a SMTP server for your system, select Yes, enter the SMTP host name

or IP address in the SMTP Host Configuration window, and click OK.

The Application User Configuration screen displays.

In the Application User Configuration screen, enter the user information for the application

user. Enter and confirm the application user password. Click OK.

The Unified MCP application administrator is different from the Unified MCP application

administrator. This configuration difference is only visible if you are configuring the first server

in a Unified MCP deployment. It is not visible if you are configuring any of the other servers

in the same deployment.

on configuring Unified CM users.

In the Platform Configuration Confirmation screen, select OK to proceed with the installation.

The installation process continues (may take several hours depending on your configuration

setup, your hardware setup, disk size, and other factors). A VM dialog prompts you to disconnect

the DVD. Click Yes to disconnect and restart the system. On completing the installation

procedure, the system restarts automatically. You must explicitly login to the Unified MCP

Administration for the required server.

To complete the server setup in any Unified MCP deployment, the Administrator must

access and configure the Unified MCP Post-Installation Setup wizard, also referred to as the

setup wizard..

Post-Installation Requirements

After installing Unified MCP on your server, you must set some configuration parameters and

perform other post-installation tasks before you start using the system. See the following table

for a list of post-installation tasks.

this task.

Perform the installation setup for the

primary server in your Unified MCP

deployment.

1

See 

Add subsequent servers.

2

See 

to

perform this task.

Perform the installation setup for

subsequent servers in your Unified

MCP deployment.

3

Installation and Administration Guide for Cisco MediaSense 8.5(1)