Cisco Cisco Firepower Management Center 2000 Notas de publicación

Firepower System Release Notes

Installing the Update

Updating Firepower Management Centers

Use the procedure in this section to update your Firepower Management Centers, including virtual Firepower
Management Centers. For the Version 6.0.1.1 update, Firepower Management Centers reboot.

Caution:

Before you update the Firepower Management Center, redeploy your configurations to any managed

devices. Otherwise, the managed device update may fail.

Caution:

Do not reboot or shut down your appliances during the update until after you see the login prompt.

The system may appear inactive during the pre-checks portion of the update; this is expected behavior and
does not require you to reboot or shut down your appliances.

Note:

Updating a Firepower Management Center to Version 6.0.1.1 removes existing uninstallers from the

appliance.

To update a Firepower Management Center:

Step 1

Read these release notes and complete any required pre-update tasks.

Step 2

Download the update from the Support site:



for Firepower Management Centers and Firepower Management Centers Virtual:

Sourcefire_3D_Defense_Center_S3_Patch-6.0.1.1-1023.sh

Note:

Download the update directly from the Support site. If you transfer an update file by email, it may become

corrupted.

Step 3

Upload the update to the Firepower Management Center by selecting System > Updates, then clicking
Upload Update on the Product Updates tab. Browse to the update and click Upload.

The update is uploaded to the Firepower Management Center. The web interface shows the type of update you
uploaded, its version number, and the date and time it was generated.

Step 4

Make sure that the appliances in your deployment are successfully communicating and that there are no
issues reported by the health monitor.

Step 5

Click the System Status icon, then click the Tasks tab and make sure that there are no tasks in progress.

You must wait until any long-running tasks are complete before you begin the update. After the system update
completes, to reduce clutter, remove the messages for these tasks from the Message Center.

Step 6

Select System > Updates.

The Product Updates tab appears.

Step 7

Click the install icon next to the update you uploaded.

The Install Update page appears.

Step 8

Select the Firepower Management Center and click Install. Confirm that you want to install the update
and reboot the Firepower Management Center.

The update process begins. To view the task status, click the System Status icon, then click on the Tasks tab.
However, after the Firepower Management Center completes its necessary pre-update checks, you are logged
out. When you log back in, the Upgrade Status page appears. The Upgrade Status page displays a progress bar
and provides details about the script currently running.

If the update fails for any reason, the page displays an error message indicating the time and date of the failure,
which script was running when the update failed, and instructions on how to contact Support. Do not restart the
update.

Caution:

If you encounter any other issue with the update (for example, if a manual refresh of the Update

Status page shows no progress for several minutes), do not restart the update. Instead, contact Support.

When the update completes, the Firepower Management Center displays a success message and reboots.