Cisco Cisco Firepower Management Center 2000 Notas de publicación
2
Firepower System Release Notes for Version 6.0.0 Pre-Install
Installing the Update
Series 3 devices running Version 5.4.0.7 or later
ASA FirePOWER modules (ASA5512-X, ASA5515-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10,
ASA5585-X-SSP-20, ASA5585-X-SSP-40, and the ASA5585-X-SSP-60) running Version 5.4.0.7 or later
ASA5585-X-SSP-20, ASA5585-X-SSP-40, and the ASA5585-X-SSP-60) running Version 5.4.0.7 or later
ASA FirePOWER modules (ASA5506-X, ASA5506W-X, ASA5506H-X, ASA5508-X, and ASA5516-X) running
Version 5.4.1.6 or later
Version 5.4.1.6 or later
Installing the Update
Before you begin the update, you must thoroughly read and understand these release notes, especially
You can update Firepower Management Centers running at least Version 5.4.1.1 of the Firepower System to Version 6.0.0
Pre-Install.
Pre-Install.
Caution:
Do not reboot or shut down your appliances during the update until you see the login prompt. The system may
appear inactive during the pre-checks portion of the update; this is expected behavior and does not require you to reboot
or shut down your appliances.
or shut down your appliances.
When to Perform the Update
Because the update process may affect traffic inspection, traffic flow, and link state, Cisco strongly recommends you
perform the update in a maintenance window or at a time when the interruption will have the least impact on your
deployment.
perform the update in a maintenance window or at a time when the interruption will have the least impact on your
deployment.
Installation Method
Use the Firepower Management Center’s web interface to perform the update.
Order of Installation
Update your Firepower Management Centers before updating the devices they manage. Once the system is running
Version 6.0.0. Pre-Install, update the system to Version 6.0.0.
Version 6.0.0. Pre-Install, update the system to Version 6.0.0.
Break Firepower Management Center High Availability Prior to Upgrade
Version 6.0.0 does not support Firepower Management Centers in a high availability pair. In order to update Firepower
Management Centers in a high availability environment, you must break the pair and update each Firepower Management
Center individually. Before updating to Version 6.0.0, you must break the high availability pair.
Management Centers in a high availability environment, you must break the pair and update each Firepower Management
Center individually. Before updating to Version 6.0.0, you must break the high availability pair.
After the Installation
After you perform the update on the Firepower Management Center, you must reapply device configuration and access
control policies. Applying an access control policy may cause a short pause in traffic flow and processing, and may also
cause a few packets to pass uninspected. For more information, see the Firepower Management Center Configuration
Guide. There are several additional post-update steps you should take to ensure that your deployment is performing
properly. These include:
control policies. Applying an access control policy may cause a short pause in traffic flow and processing, and may also
cause a few packets to pass uninspected. For more information, see the Firepower Management Center Configuration
Guide. There are several additional post-update steps you should take to ensure that your deployment is performing
properly. These include:
verifying that the update succeeded
making sure that all appliances in your deployment are communicating successfully
reapplying your access control policies
After installing the Pre-Install on the Firepower Management Center and reapplying device configuration, update the
system to Version 6.0.0. The next sections include detailed instructions not only on performing the update, but also on
completing any post-update steps. Make sure you complete all of the listed tasks.
system to Version 6.0.0. The next sections include detailed instructions not only on performing the update, but also on
completing any post-update steps. Make sure you complete all of the listed tasks.