Cisco Cisco Firepower Management Center 2000 Notas de publicación

Firepower System Release Notes

Installing the Update

Note:

Download the update directly from the Support site. If you transfer an update file by email, it may become

corrupted.

Step 3

Upload the update to the Firepower Management Center by selecting System > Updates, then clicking
Upload Update on the Product Updates tab. Browse to the update and click Upload.

The update is uploaded to the Firepower Management Center. The web interface shows the type of update you
uploaded, its version number, and the date and time it was generated.

Step 4

Make sure that the appliances in your deployment are successfully communicating and that there are no
issues reported by the health monitor.

Step 5

Click the System Status icon, then click the Tasks tab and make sure that there are no tasks in progress.

You must wait until any long-running tasks are complete before you begin the update. After the system update
completes, to reduce clutter, remove the messages for these tasks from the Message Center.

Step 6

Select System > Updates.

The Product Updates tab appears.

Step 7

Click the install icon next to the update you uploaded.

The Install Update page appears.

Step 8

Select the Firepower Management Center and click Install. Confirm that you want to install the update
and reboot the Firepower Management Center.

The update process begins. To view the task status, click the System Status icon, then click on the Tasks tab.
However, after the Firepower Management Center completes its necessary pre-update checks, you are logged
out. When you log back in, the Upgrade Status page appears. The Upgrade Status page displays a progress bar
and provides details about the script currently running.

If the update fails for any reason, the page displays an error message indicating the time and date of the failure,
which script was running when the update failed, and instructions on how to contact Support. Do not restart the
update.

Caution:

If you encounter any other issue with the update (for example, if a manual refresh of the Update

Status page shows no progress for several minutes), do not restart the update. Instead, contact Support.

When the update completes, the Firepower Management Center displays a success message and reboots.

The update process begins. You can monitor the update's progress in the task queue (System > Monitoring >
Task Status).

Caution:

Do not use the web interface to perform any other tasks until the update completes and the

Firepower Management Center reboots. Before the update completes, the web interface may become
unavailable and the Firepower Management Center may log you out. This is expected behavior; log in again
to view the task queue. If the update is still running, do not use the web interface until the update completes.
If you encounter issues with the update (for example, if the task queue indicates that the update has failed or
if a manual refresh of the task queue shows no progress for several minutes), do not restart the update.
Instead, contact Support.

Step 9

After the update finishes, clear your browser cache and force a reload of the browser. Otherwise, the user
interface may exhibit unexpected behavior.

Step 10

Log into the Firepower Management Center.

Step 11

Review and accept the End User License Agreement (EULA). Note that you are logged out of the
appliance if you do not accept the EULA.

Step 12

Select Help > About and confirm that the software version is listed correctly: Version 6.0.1.2. Also note
the versions of the intrusion rule update and VDB on the Firepower Management Center; you will need
this information later.