Cisco Cisco Content Security Management Appliance M160 Guía Del Usuario
11-93
Cisco IronPort AsyncOS 7.2.0 for Security Management User Guide
OL-21768-01
Chapter 11 Common Administrative Tasks
Managing Configuration Files in the GUI
To manage configuration files on your appliance, choose Management
Appliance > System Administration > Configuration File.
Appliance > System Administration > Configuration File.
The Configuration File page contains the following sections:
•
Current Configuration: used to save and export the current configuration
file
file
•
Load Configuration: used to load a complete or partial configuration file
•
End-User Safelist/Blocklist Database (IronPort Spam Quarantine): used
to manage the safelist/blocklist database
to manage the safelist/blocklist database
•
Reset Configuration: used to reset the current configuration back to the
factory defaults (you should save your configuration prior to resetting it)
factory defaults (you should save your configuration prior to resetting it)
Saving and Exporting the Current Configuration File
Using the Current Configuration section of the Management Appliance > System
Administration > Configuration File page, you can save the current configuration
file to your local machine, save it on the appliance (placed in the
Administration > Configuration File page, you can save the current configuration
file to your local machine, save it on the appliance (placed in the
configuration
directory in the FTP/SCP root), or email it to the address specified.
Figure 11-32
Current Configuration File
Mask the user’s passwords by selecting the check box. Masking a password
causes the original, encrypted password to be replaced with “*****” in the
exported or saved file.
causes the original, encrypted password to be replaced with “*****” in the
exported or saved file.
Note
Configuration files with masked passwords cannot be loaded back into AsyncOS.