Cisco Cisco MDS 9000 SAN-OS Software Release 1.0 Guía Para Resolver Problemas
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
BIOS: version 1.0.19
loader: version N/A
kickstart: version 5.2(8)
system: version 5.2(8)
BIOS compile time: 02/01/10
kickstart image file is: bootflash:///m9100-s3ek9-kickstart-mz.5.2.8.bin
kickstart compile time: 12/25/2020 12:00:00 [12/07/2012 19:48:00]
system image file is: bootflash:///m9100-s3ek9-mz.5.2.8.bin
system compile time: 11/9/2012 11:00:00 [12/07/2012 20:47:26]
Hardware
cisco MDS 9148 FC (1 Slot) Chassis ("1/2/4/8 Gbps FC/Supervisor-3")
Motorola, e500v2 with 1036300 kB of memory.
Processor Board ID JAF1406ASTK
Device name: rtp-san-23-02-9148
bootflash: 1023120 kB
Kernel uptime is 4 day(s), 23 hour(s), 10 minute(s), 33 second(s)
Last reset at 26277 usecs after Fri Jan 4 20:08:48 2013
Reason: Reset due to upgrade
System version: 5.2(1)
Service:
rtp-san-23-02-9148#
Restrictions in Cisco NX-OS Software Releases
Cisco NX-OS Software Release 5.2(8)
, "MDS9148 -show logging
onboard flow-control request-timeout - syntax err." This bug was fixed in Cisco NX-OS Software
Release 6.2(1) and later.
Release 6.2(1) and later.
show logging onboard flow-control request-timeout
●
show logging onboard flow-control pause-count
●
show logging onboard flow-control pause-events
●
show logging onboard flow-control timeout-drops - This command works but returns a
syntax error.
syntax error.
●
These counters are listed in the fc-mac counters, but do not show up in the onboard failure logging
(OBFL) error-stats. See Cisco Bug ID
(OBFL) error-stats. See Cisco Bug ID
, "MDS9148 OBFL doesn't contain
FCP_CNTR_TX_WT_AVG_B2B_ZERO." This bug is not resolved yet.
FCP_CNTR_TX_WT_AVG_B2B_ZERO
●
FCP_CNTR_RX_WT_AVG_B2B_ZERO
●
The slow drain port-monitor policy does not contain tx-credit-not-available. If you attempt to
configure this counter, the error message "This counter is not supported on this platform" appears.
No Simple Network Management Protocol (SNMP) traps are sent, and the show system internal
snmp credit-not-available command does not return anything.
configure this counter, the error message "This counter is not supported on this platform" appears.
No Simple Network Management Protocol (SNMP) traps are sent, and the show system internal
snmp credit-not-available command does not return anything.