Cisco Cisco MDS 9000 NX-OS Software Release 7.3 Guía De Instalación

Xbar Ports  Module-Type                      Model              Status

---  -----  -------------------------------- ------------------ ------------

1    0      Fabric Module 2                  DS-13SLT-FAB2      ok

2    0      Fabric Module 2                  DS-13SLT-FAB2      ok

Xbar Sw              Hw      World-Wide-Name(s) (WWN)

---  --------------  ------  --------------------------------------------------

1    NA              2.0     --

2    NA              2.0     --

Xbar MAC-Address(es)                         Serial-Num

---  --------------------------------------  ----------

1    NA 

XXXXXXXXXXX

2    NA 

XXXXXXXXXXX

* this terminal session

switch# 

This section provides information on upgrading your Cisco NS-OS software to Cisco NX-OS Release 
7.3(x). It includes the following sections:

If your switch is running software that is earlier than Cisco NX-OS Release 6.2(x), you must upgrade to 
Release 7.3(x). Follow this upgrade path: 

Release 5.0(x): upgrade to 5.2(x), and then upgrade to 6.2(x).

Release 4.1(x) or release 4.2(x): upgrade to Release 5.0(x), upgrade to Release 5.2(x), upgrade to 
6.2(x), and then upgrade to Release 7.3(x).

Release 3.3(2), Release 3.3(3), Release 3.3(4x), and Release 3.3(5x), upgrade to release 4.1(x) or 
Release 4.2(x), upgrade to Release 5.0(x), upgrade to Release 5.2(x), and then upgrade to 6.2(x).

Release 3.3(1c), all Release 3.2(x), all Release 3.1(x), and all Release 3.0(x), upgrade to release 
3.3(5b), upgrade to release 4.1(x) or release 4.2(x), upgrade to Release 5.0(x), upgrade to Release 
5.2(x), upgrade to 6.2(x), and then upgrade to 7.3(x).