Cisco Cisco MDS 9000 NX-OS Software Release 4.2 Notas de publicación
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
44
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.2(7e)
OL-19964-12
Caveats
•
CSCtn69150
Symptom: The install all command fails without a failure reason.
Workaround: This issue is resolved.
•
CSCtn32076
Symptom: The Call Home event triggers currently do not include the following message:
MODULE-4-MOD_WARNING
Workaround: This issue is resolved.
•
CSCtn40097
Symptom: When a power supply fails, EMC and Cisco Call Home may not send alerts.
Workaround: This issue is resolved.
•
CSCto05539
Symptom: A supervisor module failed in a Cisco MDS 9500 Series switch because CRC errors
caused sync loss.
caused sync loss.
Workaround: This issue is resolved.
Open Caveats
•
CSCty32238
Symptom: On certain hardware, certain Cisco MDS 9000 Series features and applications do not
work. These include IVR, IOA, DMM, SME, fcflow, and SPAN.
work. These include IVR, IOA, DMM, SME, fcflow, and SPAN.
The following devices with hardware revision 1.5 are affected by this issue:
–
DS-X9248-96K9, 48-port 8-Gbps Fibre Channel Switching Module
–
DS-X9248-48K9, 4/44-port host-optimized 8-Gbps Fibre Channel Switching Module
–
DS-X9224-96K9, 24-port 8-Gbps Fibre Channel Switching Module
The following devices with hardware revision 1.0 are affected by this issue:
–
DS-X9304-18K9, 18/4-Port Multiservice Module (MSM-18/4)
For this module, the affected version is 73-14372-01A0 hardware version 1.0 (due to the new
73-number)
For this module, the affected version is 73-14372-01A0 hardware version 1.0 (due to the new
73-number)
–
DS-C9222i-K9, Cisco MDS 9222i Multilayer Fabric Switch
For this switch, the affected version is 73-14373-01A0 hardware version 1.0 (due to the new
73-number)
For this switch, the affected version is 73-14373-01A0 hardware version 1.0 (due to the new
73-number)
For the DS-X9248-96K9, DS-X9248-48K9 and DS-X9224-96K9 modules, the output of the show
module command indicates whether or not the device is affected.
module command indicates whether or not the device is affected.
switch# sh mod 2
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
2 24 1/2/4/8 Gbps FC Module DS-X9224-96K9 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
--- -------------- ------ --------------------------------------------------
2 5.2(1) <B>1.0</B> 20:41:00:0d:ec:24:f4:c0 to
20:58:00:0d:ec:24:f4:c0
In the preceding output, the device is hardware revision 1.0 and therefore not affected.